Castrol MAGNATEC 10W-40 is specifically engineered for today’s urban driving environment and designed to protect engines against the wear caused by re-starting in busy traffic. Castrol MAGNATEC clings like a magnet and locks to protect vulnerable metal surfaces and moving parts in your engine during warm-up, delivering superior protection from engine wear versus the Sequence IVA API SN wear limit. Castrol MAGNATEC 10W-40 is a part synthetic engine oil suitable for petrol engines, direct and indirect injection engines, LPG and CNG cars, light commercial vehicles and 4WDs where API SP or earlier specification SAE 10W-40 engine oils are required. Choose Castrol MAGNATEC 10W-40 for non-stop protection from every start.
Castrol GTX ULTRACLEAN synthetic engine oil technology has superior performance. Its unique Double Action formula cleans away old sludge, and protects against new sludge formation, giving you more control over today´s challenging conditions. Castrol GTX ULTRACLEAN 15W-40 is suitable for use in automotive petrol, LPG, CNG and diesel engines where the manufacturer recommends an ACEA A3/B3, API SN/CF or earlier specification 15W-40 lubricant.
Castrol GTX High Mileage 15W-50 is suitable for use in automotive petrol engines where the manufacturer recommends an API SN or earlier specification SAE 15W-50 lubricant. Help extend the life of your high mileage engine with Castrol GTX High Mileage 15W-40.
Mild extreme pressure gear oil with special viscosity stabilisers to overcome shift problems. Recommended for use in transaxles of most front wheel drive vehicles with a transverse engine and manual transmissions experiencing low temperature shift problems. SAE 75W/80, API GL4.
Mild extreme pressure gear oil with special viscosity stabilisers to overcome shift problems. Recommended for use in transaxles of most front wheel drive vehicles with a transverse engine and manual transmissions experiencing low temperature shift problems. SAE 75W/80, API GL4.
Is suitable for use in all brake fluid systems in cars, and light commercial vehicles requiring either a DOT 3, DOT 4 or Super DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
A fully formulated, ethylene glycol based coolant designed to meet the requirements of the majority of cars and light commercial vehicles with petrol and diesel engines. Use at 30 - 50% concentration as recommended by the vehicle manufacturer.
Castrol Radicool P-OAT is a nitrite, amine, borate and silicate free antifreeze coolant for vehicles requiring Phosphated Organic Additive Technology (P-OAT). Aqueous solutions of Castrol Radicool P-OAT act as both antifreeze and coolant and offers excellent protection for the metals used in engine radiator systems, cylinder block heads, water pumps and heat exchangers.
or
3
Good
3
Good
CASTROL RADICOOL P-OAT PREMIX
Castrol Radicool P-OAT Premix is a ready to use engine coolant and antifreeze. It is nitrite, amine, borate and silicate free with phosphate-inhibitor technology for vehicles requiring phosphated OAT technology. Castrol Radicool P-OAT Premix is both antifreeze and coolant and offers excellent corrosion protection to all metal parts found in the cooling system of internal combustion engines.
Note
Do NOT mix Castrol coolant with other brands of antifreeze, coolants or corrosion inhibitors because of possible incompatibility of inhibitors. Follow manufacturer's recommendations for coolant concentration.
Capacities shown are approximate only.
Where the manufacturer specifies the capacity as including filter/s, the capacity is marked thus (*).
Unless otherwise indicated (e.g. by a notation), capacities shown are service refill quantities.
In all cases, the dipstick or level plug should be used as a final check.