Castrol EDGE 5W-30 LL is an advanced full synthetic engine oil approved for use in automotive petrol, hybrid and diesel vehicles - including diesel vehicles equipped with a diesel particulate filter, where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant. Castrol EDGE 5W-30 LL is approved for use in vehicles from leading manufacturers and carries OEM approvals including BMW Longlife-04, MB-Approval 229.31 / 229.51, Porsche C30 and VW 504 00 / 507 00. Choose Castrol EDGE and unlock the very edge of performance. Castrol EDGE 5W-30 LL is also proven to deliver against Castrol’s HYSPEC standard. In doing so it is proven to demonstrate at least 25% benefit^ across the three critical hybrid areas of contaminants, engine intermittency and system efficiency. ^Compared to performance minimum requirements set in both industry specification and Castrol bespoke testing across tests applicable to hybrid vehicle types, covering contaminants, engine intermittency and system efficiency.
Is suitable for use in all brake fluid systems in cars, and light commercial vehicles requiring either a DOT 3, DOT 4 or Super DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
Suitable for use in all brake fluid systems in cars, motorcycles and light commercial vehicles requiring either a DOT 3 or DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
Castrol Radicool SF Premix is a long-life ready to use coolant based on monoethylene glycol with advanced organic acid inhibitor technology free from amines, nitrites, phosphates, silicates or other inorganic inhibitors. Especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. This product requires no customer dilution therefore ensures the correct concentration is always used.
Do NOT mix Castrol coolant with other brands of antifreeze, coolants or corrosion inhibitors because of possible incompatibility of inhibitors. Follow manufacturer's recommendations for coolant concentration.
Capacities shown are approximate only.
Where the manufacturer specifies the capacity as including filter/s, the capacity is marked thus (*).
Unless otherwise indicated (e.g. by a notation), capacities shown are service refill quantities.
In all cases, the dipstick or level plug should be used as a final check.