Castrol MAGNATEC 10W-40 is specifically engineered for today’s urban driving environment and designed to protect engines against the wear caused by re-starting in busy traffic. Castrol MAGNATEC clings like a magnet and locks to protect vulnerable metal surfaces and moving parts in your engine during warm-up, delivering superior protection from engine wear versus the Sequence IVA API SN wear limit. Castrol MAGNATEC 10W-40 is a part synthetic engine oil suitable for petrol engines, direct and indirect injection engines, LPG and CNG cars, light commercial vehicles and 4WDs where API SP or earlier specification SAE 10W-40 engine oils are required. Choose Castrol MAGNATEC 10W-40 for non-stop protection from every start.
Castrol GTX ULTRACLEAN synthetic engine oil technology has superior performance. Its unique Double Action formula cleans away old sludge, and protects against new sludge formation, giving you more control over today´s challenging conditions. Castrol GTX ULTRACLEAN 15W-40 is suitable for use in automotive petrol, LPG, CNG and diesel engines where the manufacturer recommends an ACEA A3/B3, API SN/CF or earlier specification 15W-40 lubricant.
Castrol GTX High Mileage 15W-50 is suitable for use in automotive petrol engines where the manufacturer recommends an API SN or earlier specification SAE 15W-50 lubricant. Help extend the life of your high mileage engine with Castrol GTX High Mileage 15W-40.
A premium synthetic automatic transmission fluid specifically designed for use in vehicles with automatic transmissions made by Asian vehicle and transmission manufacturers which typically have higher anti-shudder performance requirements than most European or US designed automatic transmissions. Castrol Transmax Multivehicle was designed to meet the Japanese Automobile Standards Organisation performance needs (JASO 1A) which is recognised by most Japanese Automobile Manufacturers.
Mineral gear oil recommended for differentials, gearboxes and steering gears of heavier cars, trucks, farm machineryand earthmoving equipment. For all hypoid differentials where vehicle operates at very high loads. API GL-5, MIL-PRF-2105E, Mack GO-J, ZF TE-ML05C, API MT-1
Is suitable for use in all brake fluid systems in cars, and light commercial vehicles requiring either a DOT 3, DOT 4 or Super DOT 4 product (Not suitable for use where a mineral oil based fluid is specified).
A fully formulated, ethylene glycol based coolant designed to meet the requirements of the majority of cars and light commercial vehicles with petrol and diesel engines. Use at 30 - 50% concentration as recommended by the vehicle manufacturer.
Castrol Radicool P-OAT is a nitrite, amine, borate and silicate free antifreeze coolant for vehicles requiring Phosphated Organic Additive Technology (P-OAT). Aqueous solutions of Castrol Radicool P-OAT act as both antifreeze and coolant and offers excellent protection for the metals used in engine radiator systems, cylinder block heads, water pumps and heat exchangers.
or
3
Good
3
Good
CASTROL RADICOOL P-OAT PREMIX
Castrol Radicool P-OAT Premix is a ready to use engine coolant and antifreeze. It is nitrite, amine, borate and silicate
free with phosphate-inhibitor technology for vehicles requiring phosphated OAT technology. Castrol Radicool P-OAT
Premix is both antifreeze and coolant and offers excellent corrosion protection to all metal parts found in the cooling
system of internal combustion engines.
Note
Do NOT mix Castrol coolant with other brands of antifreeze, coolants or corrosion inhibitors because of possible incompatibility of inhibitors. Follow manufacturer's recommendations for coolant concentration.
Capacities shown are approximate only.
Where the manufacturer specifies the capacity as including filter/s, the capacity is marked thus (*).
Unless otherwise indicated (e.g. by a notation), capacities shown are service refill quantities.
In all cases, the dipstick or level plug should be used as a final check.